[Modification actual combat]carbon fiber black and white two-color configurationCorolla Sport super killer style

Vehicle/electroplated car bath, Jiafeng Technology Research

Front MacPherson rear double A-arm

Handling response is better than ever

Seeing the name of the Corolla Sport, you may wonder what is the relationship between this car and the Altis, and why the name of the car has the word Corolla in it. In fact, the Corolla Sport does have many similarities with the Corolla Altis, such as the same TNGA chassis The structure is built, so the front and rear suspension structures are the configuration of front MacPherson and rear double A-arms. The main interior furnishings, including the design of the center console, gear seat and steering wheel, are almost the same. However, there are many similarities and differences. In addition to the difference in the hatchback body type, including the different length and width settings, the exterior design is also quite different.

In addition, the engine architecture is also quite different. The Altis car series uses a 1.8-liter naturally aspirated or 1.8-liter gasoline-electric hybrid configuration, while the Corolla Sport is configured with a more powerful and updated 2.0-liter Dynamic Force four-cylinder. The naturally aspirated engine, in addition to having in-cylinder direct injection technology, is also equipped with VVT-iE electronically controlled continuously variable valve timing system at the intake end, and VVT-i continuously variable valve timing control technology at the exhaust end , it can provide a maximum horsepower of 170hp at an engine speed of 6600rpm, and can continuously output a maximum torque of 20.4kgm between 4400 and 4800rpm.

It is paired with a 10-speed CVT gearbox that can simulate 10-speed. This gearbox is also equipped with a Lauch Gear starting gear configuration, which can improve the problem of heavy drag at start that is more likely to occur with traditional CVTs, and provides a Sport mode selection . Also because of the above configuration differences, and the introduction of imports for sale, Corolla Sport actually has a stable sales volume of about 200 units per month in the domestic auto market, so the visibility on the road will not be better than that of Mazda 3 five-door models come at a low price.

As for this white Corolla Sport modified real car, the modified method is mainly to replace a large number of aerodynamic kits. In addition to the bright black front spoiler and the fixed wind wings on the left and right sides of the front part, the most striking thing is the carbon fiber The hood, this hood is equipped with six shark fin cooling holes, whether viewed from the front or the side, it is very obvious, and the owner can also choose whether to open holes, if the opening helps the engine room to dissipate heat , but for waterproof and anti-fouling, a design mechanism is required. If there is no opening, the shape will also have a bonus effect. In addition, the addition of the positive carbon fiber patch on the LOGO frame and the carbon fiber patch on the front nose also contributes to the completeness of the modification.

The side part of the car is equipped with bright black wheel arcs and matched with T-style positive carbon fiber side skirts. This set of side skirts is different from the side skirts used in the other two Corolla Sport modified cars. It is directly under the original side skirts. Installing a piece of carbon fiber wing panel is a relatively common modification method in performance car kits, which can present a cleaner side line of the car. At the rear of the car, the carbon fiber rear plate + rear midpack has been replaced under the rear bumper, and the performance atmosphere of the rear of the car has been enhanced through a large area of ​​carbon fiber lines. In addition, the left and right sides of the rear bumper are also equipped with air knife trims and fixed air wings, all of which are covered with carbon fiber texture, which can achieve an integrated visual effect with the rear mid-pack. After the whole car is modified with black paint or carbon fiber aerodynamic kit, it presents a black and white two-color exterior tone, which makes the side of the car have a very obvious sense of contrast and easily attracts the attention of passers-by.

Modification schedule

Poms T style bright black front chin Poms positive carbon fiber six-hole hood Poms LOGO frame positive carbon fiber patch Poms front nose front carbon fiber patch Poms T style bright black wheel arc Poms T style positive carbon fiber side group Poms T style positive carbon fiber rear plate Poms T style positive carbon fiber rear center package Poms M style positive carbon fiber rear wing Poms T style positive carbon fiber three-hole rear spoiler Poms positive carbon fiber half-wrapped door handle

Poms Carbon Fiber Door Bowl Poms Customized Carbon Fiber Steering Wheel Poms D Type Carbon Fiber Front Air Knife Poms D Type Carbon Fiber Rear Air Knife Piano Baking Paint 3M Kameng Interior Film Varro VD06 18-inch 8.5J ET35 spinning rim ■BC Racing BR 30-stage high-low soft and hard adjustable shock absorber ■Manual valve four-outlet exhaust pipe ■Simota carbon fiber superconducting air intake system.